Project:
Small practical knobs and brackets

Contents:

1. Latitude adjuster screw
2. Cable bracket
3. Spirit level bracket
4. Handle and USB HUB label
5. Sight
6. Battery bracket
7. Frame to protect USB3 mini cable
8. To be continued

Note:
I take no responsibility or liability for what are written here, you use the information on your own risk!

4: Handle and USB HUB label:

I needed a handle to hold the camera system. Reused the old I already had to make it quick. It's made of steel and the GPS magnet attach to it.

As you already know, it's very important to not disconnect any USB cable from the USB HUB when on power. If you do that it can lose its internal port number and everything will be a mess. If you take them away when not powered it's very important to plug them in at the same place as before. To not do any mistake I have mad a label with each USB ports function. If I had done this already from the beginning I had saved a lot of problem and time.

This HUB is very practical, powered with 12 Volt and each port can deliver 2 Amp, but not all at the same time, max total load is 8 Amp (5 Volt).